Process Description :
Model: MPS-9UV
Produced time: 2008-2010
Overview
Components:
- Pre-Filter filters out larger particles
- Carbon filter reduces odors
- HEPA filter removes particles as small as pollen, smoke, mold and airbond dust
- Replaceable Uvc tube: UV lamp provide germicidal irradiation that destroys airbone bacteria and viruses
- The photocatalytic filter decomposes toxic gases and viruses from the air with UV lamp. Model MPS-X7 only.
- Fan 45W: squirrel cage type. Super low noise. 2 speeds: middle/strong
- UV digital meter: Replace UV tube when value of UV digital meter is lower than 1.5
- Maintenance: Clean and replace filters on a regular basic. Pre-filter: Use a vaccum cleaner to clean off dust at least every three months. HEPA filter: - - Replaced every 12 months. Uvc lamp: Replaced every 12 months or value of UV digital meter is lower than 1.5
Important safeguard warning
To reduce the risk of fire, electric shock or injury, must obey the following items:
1. Close attention is necessary when the MPS is operated near children
2. Turn off the power switch and unplug before servicing. The equipment should be inspected frequently and collected durt removed regularly to prevent excessive accumulation.
3. Use indoor only. Do not use outdoors or on wet surfaces
4. Check that your power supply voltage is 220 v AC/50Hz/1 phase
5. Always disconnect cord from electrical outlet before servicing the air purifier. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
6. Never handle the plug or MPS with wet hand. Do not operate the MPS near the shower, bathtub or in a place where steam may be present as this could impact the unit’s performance and/or cause a short circuit.
7. Do not operate the MPS near a heater or flammable products.
8. Do not put objects into the cover openings
9. Do not place directly beneath a smoke detector, as this could reduce the smoke detector’s sensitivity
|